Environmental Triaxial Testing System Wille Geotechnik
Liên hệ
Loading...
Environmental Triaxial Testing System Wille Geotechnik
American

American

Viet Nam

Viet Nam

Environmental Triaxial Testing System Wille Geotechnik

This high-quality stress path high-pressure temperature-controlled triaxial test system is a fully automatic system that uses an active triaxial cell with a built-in axial loading mechanism (based on Bishop & Wesley cell type) that controls stress directly on the sample. In Addition to the active cell, the system includes three high-pressure volume pressure controllers (VPC), an internal submersible load cell to measure axial load, a pressure transducer to measure pore water pressure, a linear displacement transducer to measure vertical displacement, a lifting mechanism, and temperature controlling unit.

The triaxial cell is made from stainless steel and specifically designed for high-pressure tests under various temperature conditions and has an internal submersible load cell for axial load measurement. This system needs 3 Advanced volume pressure controllers for the axial load (lower chamber), cell pressure and one for back pressure.

  • High Stiff system
  • Easy sample setup and handling of the test
  • Sample Size up to 50mm in diameter
  • Different Cell pressures from 8MPa up to 30MPa
  • Different Axial Loads from 7kN up to 150kN
  • Cyclic Temperature tests from -20 °C up to 100°C
  • Vertical lifting mechanism for triaxial cell
  • Horizontal sliding mechanism for Triaxial cell
  • Microprocessor-controlled precision
  • Direct operation of the device by a PC with controlling software (communication protocol is available)

SAMPLE SIZE/S

38mm - 50mm / 70mm-100 mm

SAMPLE HEIGHT /DIAMETER RATIO

2:1

CELL PRESSURE

10 MPa / 20 MPa

MAX. AXIAL LOAD

25kN / 50kN / 100kN

MAX. AXIAL LOAD WITH MOTORIZED VERSION

50kN

PRESSURE ACCURACY

0.1% F.S

VOLUME ACCURACY

0.1% F.S

RANGE OF TESTING TEMPERATURE

From -20 °C to Ambient temperature

From ambient temperatures to +200°C

From -20°C to 200°C

DIMENSIONS (MAIN DEVICE): WXDXH

1039*1466*2389mm

WEIGHT

650Kg

POWER SUPPLY

230 V AC /50Hz

Environmental Triaxial Testing SystemHệ thống thử nghiệm ba trục môi trườngThiết bị kiểm tra ba trục áp suất cao - nhiệt độ caoHigh Pressure-High Temperature Triaxial Test Device
  • Chia sẻ qua viber bài: Environmental Triaxial Testing System Wille Geotechnik
  • Chia sẻ qua reddit bài:Environmental Triaxial Testing System Wille Geotechnik

PRODUCTS

Loading...

RELATED PRODUCTS

Large Diameter Dynamic Triaxial Testing System Wille Geotechnik

The large-scale triaxial testing systems are customized construction systems configured based on the testing requirements of the customer. These systems are used to perform static tests on specimens with large particle sizes, such as dam ballast, railway ballast, and gravels. The Large Diameter Dynamic Triaxial Testing System can apply up to 1000 kN load with a frequency of up to 50 Hz  on samples with a diameter of up to 600 mm. (An ultra-large triaxial system is available on request for sample sizes up to 1000 mm.) The wide column spacing enables the accommodation of large cells, even with environmental chambers and furnaces. The load frame features a pneumatic sliding system, which allows easy movement of the triaxial cell out of the loading area, making test setup handling easier for the operator. The powerful multifunctional GEOsys software supports all test procedures, providing easy access to all testing sessions.
Xem thêm

Resilient Modulus Testing System Wille Geotechnik

The new fully automatic Resilient Modulus Testing System (RMTS) is based on our cyclic tabletop electromechanical Triaxial test System with closed-loop control of the axial load, displacement and confining pressure. The Cyclic load simulates conditions produced by traffic. The device with different components can comply with the requirements of AASHTO T 307-99, AG:PT/T053 and AS1289.6.8.1. As the device is based on our cyclic Triaxial test therefore can also be used to perform other dynamic and static tests such as Stress Path, cyclic strength, liquefaction, Ko- Consolidation, as well as conventional UU, CU, and CD tests with the addition of components for back pressure control and pore pressure measurement. GEOsys software in combination with this unit performs all your tests automatically and without operator assistance during the test period.
Xem thêm

Servo Hydraulic Dynamic Triaxial Testing System Wille Geotechnik

This series of Dynamic Triaxial test systems gives the possibility to perform large loads and frequencies on the required specimen size in combination of static or cyclic cell pressure. The Wide column spacing enables to accommodate large cells even with environmental chambers and furnaces. The Triaxial system can generate and apply different types of loading waveforms that can be given to the sample e.g. Sinusoidal, Square, Triangular, Rectangle, Ramp signal, and user-defined waveform. The dynamic servo hydraulic load frame has different models which could be selected per as required technical test specification of the user e.g: 1) Table top model 2) Floor type model 3) Twin type model (independent dynamic - static actuators)
Xem thêm

Columnless Cyclic Triaxial Testing System Wille Geotechnik

The column-less loading system applies the static and cyclic loads from the bottom of the Triaxial cell. The top of the cell is free operating space to facilitate installation of sample or local strain measuring devices. The Triaxial cell is connected to a lifting mechanism that lifts the cell wall up and gives the easiest way for the operator to handle the cell. The load piston has the possibility to compensate for cell pressure changes effected by the volume change of the piston inside the triaxial cell during cyclic and static tests. This loading system is specially designed and configured for cyclic Triaxial tests and use compensated ram technology. The system includes a special load pistol construction to compensate cell-pressure changes affected by the volume change of the movement of piston in and out of the triaxial cell.
Xem thêm